You can either update the Mikme OS software via
A - the Mikme App over the air (OTA) or
B - manually via USB with your computer.

A - the Mikme App over the air (OTA) or

If your Mikme has a Mikme OS version:
(Here is where you find the version)

which is HIGHER than 54.04
--> then you can update your Mikme via the Mikme App over the air. 

which is LOWER than 54.04
--> then you need to update your Mikme manually via USB with your computer.
--> please proceed to "B - Manually via USB with your computer."

Here is how you update the Mikme OS via the Mikme App OTA:

1 – Turn your Mikme on

2 – Select the Mikme


Go to settings in the app
Select the Mikme in the Mikme App in the settings

3 – Go into the settings of the Mikme Microphone

Tap the "Update" button
Tap the "Update your Mikme" button to start the update.
The app will now automatically update the Mikme.
The top LED of the Mikme will flash green and blue while the update is active.
Wait until the Mikme is updated.
After the update the top LED of the Mikme will flash white.
Then the Mikme will restart automatically and reconnect with the app automatically.
Now the update is finished successfully

B - Manually via USB with your computer.

How to update the Mikme OS on Windows:

How to update the Mikme OS on macOS:

Here is the manual update via USB as a step by step guide.

1 – Important

  • Backup all your recordings of your Mikme Microphone. Copy all files from your Mikme Microphone onto your computer.
  • DO NOT disconnect Mikme at any time while updating.
  • Here you can find out what Mikme OS you have installed.

2 – Download the latest Mikme OS

  • Click the button below and save the Mikme OS (firmware or operating system) file for your Mikme Microphone to your computer:
  • Unzip the file Mikme OS 0_54_04.zip you just downloaded.

3 – Prepare your Mikme Microphone

  • Make sure your Mikme is powered off
  • Connect your Mikme with the USB cable that came with your Mikme to your computer USB port.
  • Turn your Mikme Microphone on (push the Power button on the left back side of your Mikme for a second).
  • Mikme's top capture LED will flash orange (it can take up to 10 seconds until the top capture LED flash orange).

4 – Update the Mikme OS

  • You should see the Mikme mounted as an external storage on your computer's file explorer – it can take up to 10 seconds until the top capture LED flash orange.
  • Open the folder /Downloads/ of your computer
    and the subfolder /Mikme OS 0_54_04/ 
  • Open the Mikme Microphone's root folder. The root folder is the main folder you see if you click on the connected Mikme at your computer's file explorer. 
  • Copy or move the file
    ff005404.mkm
    from your computers folder /Downloads/
    to the Mikme Microphone's root folder.
  • Eject Mikme from your computer (use the eject button of your computers file explorer).

    DO NOT disconnect the USB cable which connects Mikme with your computer.
  • Now Mikme will perform the update — it takes about 1 minute.
    The top LED of the Mikme will blink blue and green while the updating. 
  • Wait until the Mikme restarts automatically.

If the top LED of your Mikme is white or orange again then the update was done successfully.

How to update the Mikme OS on Windows:

How to update the Mikme OS on macOS:


It's time to start capturing your masterpiece.

Happy Creating!

Did this answer your question?